SAMPLER VIDEO: Please watch this first.

Phoenix sampler contains quick cuts from all nine of our demo videos including: the original promo DVD (drawing, punching, clamping, bending, etc.), Howard Clark (pattern welding), Becky Little (fireplace tool), John Little (making tongs, chisel decorations), the instant tool change, the Phoenix control demo, and much more. Just three minutes long, this a very fast moving overview of all the material we have available. Please watch this first, we think you will like it. The small file (to save bandwidth) is a bit grainy, the hirez version is quite clear.

sampler.mov (4.2 MB)

samplerhirez.mov (14.1 MB)

VIDEO

Howard Clark: Master Swordsmith demonstrating pattern welding using a Phoenix forging hammer live at Larry Harley's knifemaking hammer-in, from the first weld to the final pattern.

clarkdemo.mov (4.6 MB)

VIDEO

John Little, from East Dover Nova Scotia forging tongs using a Phoenix forging hammer and the instant tong tool.

JLtongs.mov (2.2 MB)

VIDEO

John Little from East Dover Nova Scotia using a Phoenix forging hammer to strike single blows to make deep chisel decorations in hot steel. John will tell you: "You can't do this with any other hammer"...

JLchisel.mov (1.8 MB)

VIDEO

Becky Little demonstrating the instant tool change holder available for all Phoenix forging hammers

toolchange.mov (1.3 MB)

VIDEO

John and Becky Little forging deep into a large, 1" thick plate using single blows from a Phoenix forging hammer

J+Bplate.mov (624 KB)

VIDEO

Tom Troszak demonstrating drawing, punching, clamping, bending, etc. from our original Phoenix Hammer promotional DVD as as either a Quicktime or .WMV file:

promo.mov (12.3 MB)

broadband.wmv (37.5MB)

VIDEO

Becky Little of Nova Scotia, forging one of her fireplace tools as featured in: The Anvil's Ring, fall 2004 issue: Bho'n Teallach - From the Forge p. 44 using a Phoenix 150 B forging hammer

quicktime (small: 5MB)

quicktime (medium: 15MB)

IMAGES

Demonstration of the power of the Phoenix 150:

Forging a hook from 3" diameter bar

IMAGES

Demonstration of the clamping feature of the Phoenix 150:

Forging a handle in just two heats

IMAGES

Demonstration of the control and use of single blows with the Phoenix 150:

Drawing a point on a paper clip, 1/4" bar, and decorating with single identical blows

VIDEO

See in awesome slow motion how the blows from the 150 lb. hammer penetrate right through the center of a 3" diameter bar

Quicktime .mov 1.8 MB

VIDEO

See how the clamping capability allows shaping this handle in one heat without leaving the hammer

Quicktime .mov 2.4MB